0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Laboratory investigation of a bridge scour monitoring method using decentralized modal analysis

Autor(en):





Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Structural Health Monitoring, , n. 6, v. 20
Seite(n): 147592172098512
DOI: 10.1177/1475921720985122
Abstrakt:

Scour is a significant issue for bridges worldwide that influences the global stiffness of bridge structures and hence alters the dynamic behaviour of these systems. For the first time, this article presents a new approach to detect bridge scour at shallow pad foundations, using a decentralized modal analysis approach through re-deployable accelerometers to extract modal information. A numerical model of a bridge with four simply supported spans on piers is created to test the approach. Scour is modelled as a reduction in foundation stiffness under a given pier. A passing half-car vehicle model is simulated to excite the bridge in phases of measurement to obtain segments of the mode shape using output-only modal analysis. Two points of the bridge are used to obtain modal amplitudes in each phase, which are combined to estimate the global mode shape. A damage indicator is postulated based on fitting curves to the mode shapes, using maximum likelihood, which can locate scour damage. The root mean square difference between the healthy and scoured mode shape curves exhibits an almost linear increase with increasing foundation stiffness loss under scour. Experimental tests have been carried out on a scaled model bridge to validate the approach presented in this article.

Structurae kann Ihnen derzeit diese Veröffentlichung nicht im Volltext zur Verfügung stellen. Der Volltext ist beim Verlag erhältlich über die DOI: 10.1177/1475921720985122.
  • Über diese
    Datenseite
  • Reference-ID
    10562573
  • Veröffentlicht am:
    11.02.2021
  • Geändert am:
    29.11.2021
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine