0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Investigation of Subgrade Stabilization Life-Extending Benefits in Flexible Pavements Using a Non-Linear Mechanistic-Empirical Analysis

Autor(en): ORCID

ORCID
ORCID

ORCID
Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Infrastructures, , n. 2, v. 9
Seite(n): 33
DOI: 10.3390/infrastructures9020033
Abstrakt:

This paper investigates the effect of subgrade soil stabilization on the performance and life extension of flexible pavements. Several variables affecting soil stabilization were considered, including subgrade soil type (CL or CH), additive type and content (3, 6, and 9% of hydrated lime, 5, 10, and 15% of class C fly ash (CFA), and 5, 10, and 15% of cement kiln dust (CKD)), three stabilization thicknesses (15, 30, and 45 cm), and four pavement sections with varying thicknesses. The effects of these variables were investigated using four different damage mechanisms, including the fatigue life of the asphalt concrete (AC) and stabilized subgrade layers, the crushing life of the stabilized subgrade soil, and the rutting life of the pavement, using a non-linear mechanistic-empirical methodology. The results suggest that the optimum percentage that maximizes the pavement life occurs at 3% of lime for subgrade soil type CL, 6% of lime for subgrade type CH, and 15% of CFA and CKD for both subgrade soil types. The maximum pavement life increase occurred in the section with the lowest thickness and the highest stabilization thickness, which was 1890% for 3% of lime in the CL subgrade and 568% for 6% of lime in the CH subgrade. The maximum increase in the pavement life of subgrade stabilization with 15% of CFA was 2048% in a CL subgrade, and 397% in a CH subgrade, and life extension due to subgrade stabilization with 15% of CKD was 2323% in a CL subgrade and 797% in a CH subgrade.

Copyright: © 2024 the Authors. Licensee MDPI, Basel, Switzerland.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10776434
  • Veröffentlicht am:
    29.04.2024
  • Geändert am:
    05.06.2024
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine