0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Investigation of Load Capacity of Steel Concrete Composite Columns Src Reinforced by IPE

Autor(en): (Lecturer, Department of Civil Engineering , Lorestan University , Khorramabad , Iran)
(M.Sc, Department of Civil Engineering , Zanjan University , Zanjan , Iran)
(PhD Candidate, Khorramabad Branch , Islamic Azad University , Iran)
(M.Sc, Department of Civil Engineering , Ferdowsi University , Mashhad , Iran)
Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Civil and Environmental Engineering Reports, , n. 2, v. 29
Seite(n): 101-116
DOI: 10.2478/ceer-2019-0019
Abstrakt:

In this study, a column with section IPE and different lengths, completely embedded in concrete, is modelled by finite element software ABAQUS. Columns under different bi-axial loading were used and graphs of axial force-axial deformation, interaction axial force, and bending moment and column curve were mapped. The results show that the load capacity of the column, with increasing length and also increasing eccentricity of the axial load, will be reduced. With increasing length, the effect of an increased eccentricity of the reduced load capacity was increased. Equations for the design of the column are also presented. The results of the presented equations were compared with the values obtained from finite element and building national institute 10th topic.

Structurae kann Ihnen derzeit diese Veröffentlichung nicht im Volltext zur Verfügung stellen. Der Volltext ist beim Verlag erhältlich über die DOI: 10.2478/ceer-2019-0019.
  • Über diese
    Datenseite
  • Reference-ID
    10705191
  • Veröffentlicht am:
    19.02.2023
  • Geändert am:
    19.02.2023
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine