0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Investigation of Fresh and Hardened Characteristics of Self-Compacting Concrete with the Incorporation of Ethylene Vinyl Acetate and Steel-Making Slag

Autor(en):





Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Advances in Civil Engineering, , v. 2019
Seite(n): 1-11
DOI: 10.1155/2019/9146343
Abstrakt:

Advancement in the construction industry causes decline in the availability of natural resources, and this decline can be overcome by utilization of the available raw materials. This study is focused on the combined effects of ethylene vinyl acetate (EVA) and ladle furnace slag (LFS) on fresh and hardened characteristics of self-compacting concrete (SCC) by replacing some fraction of cement and sand. The characteristics of SCC in its fresh state are investigated by workability, while hardened characteristics are investigated by elastic modulus and compressive, tensile, and flexural strength. The findings showed that the workability is enhanced by the incorporation of EVA, while decreased with LFS. Furthermore, all the strength properties were enhanced at all the replacement levels of EVA and LFS except for the splitting tensile strength. The utmost gain in elastic modulus and compressive, tensile, and flexural strength was up to 18, 20, 10, and 15% more by increasing the dosage of LFS while keeping EVA constant.

Copyright: © 2019 Kashif Ali Khan et al.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10317315
  • Veröffentlicht am:
    11.07.2019
  • Geändert am:
    02.06.2021
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine