0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Investigation into Viscoelastic Properties of Fiber-Reinforced Asphalt Composite Concrete Based on the Burgers Model

Autor(en):


ORCID
Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Buildings, , n. 2, v. 13
Seite(n): 449
DOI: 10.3390/buildings13020449
Abstrakt:

Asphalt composite concrete pavement is one of the common pavement forms in China. However, due to the influence of design, materials, construction quality, and other aspects, asphalt composite concrete pavement develops various degrees of cracks after being put into use, which affects the service performance and life of asphalt pavement. The Burgers model is used to examine the effects of fiber-volume_fraction and length–diameter-ratio on the viscoelastic mechanical behavior model parameters and viscoelastic properties of asphalt composite concrete through the bend test for creep of polyester fiber asphalt composite concrete beam. The findings indicate that the fiber’s ability to control asphalt composite concrete bending creep deformation increases initially and subsequently diminishes as fiber-volume_fraction and length–diameter-ratio increase. Fiber-volume_fraction and length–diameter-ratio effects can be fully reflected by fiber amount characteristics. A viscoelastic mechanical behavior model of fiber-reinforced asphalt composite concrete is developed on this foundation while taking into account the influence of fiber amount characteristic factors. Theoretical study and practical research indicate that the ideal fiber volume ratio of polyester fiber asphalt composite concrete is 0.35 percent, the ideal length-to-diameter ratio is 324, and the ideal fiber amount characteristic parameter is 1.13. The test results can provide a certain reference value for the improvement of the long-term durability of fiber asphalt composite concrete pavement of road engineering.

Copyright: © 2023 by the authors; licensee MDPI, Basel, Switzerland.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10712486
  • Veröffentlicht am:
    21.03.2023
  • Geändert am:
    10.05.2023
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine