Integration of Phase Change Materials in Service Areas of Building Envelopes for Improved Thermal Performance: An Experimental Study in Saudi Arabia

This experimental study explores the integration of Phase Change Materials (PCMs) within building envelopes. The research specifically centers on the utilization of two microencapsulated paraffin-based PCMs with melting points of 37 °C and 43 °C. The study assesses their performance within cement and gypsum-based PCM composites, concentrating on service areas often overlooked in thermal analysis, including underground garages, staircases, and utility rooms. The experimental setup included constructing three chambers inside an underground garage during the hot months of June and July in Saudi Arabia. Two chambers were assigned to integrate the PCM, while the third chamber served as a control without PCM. The experiment unfolds in two phases. In the initial phase, the objective was to determine which PCM is more effective in reducing the heat load inside the chambers. This led to the adoption of the 43 °C PCM for the subsequent stage. The adoption of the 43 °C PCM resulted in a fourfold decrease in heat compared to the 37 °C PCM. The second phase investigates the integration of the selected PCM with cement and gypsum composites. The percentage of PCM incorporated into the concrete and gypsum composites was determined experimentally. For cement-based composites, the identified percentage that maintains material integrity is 20%, and for gypsum-based composites, it is 22%. The findings demonstrate a significant reduction in cooling load with PCM incorporation, with cement-based composites exhibiting superior thermal performance compared to gypsum-based alternatives and reducing the heat load by approximately 63%. Additionally, it was observed that concrete reduced the highest temperature during the day by 5.2 °C, which equates to about a 10% reduction, further enhancing comfort. Conducted over the course of two summer seasons, this study contributes valuable insights toward improving the quality of life for building occupants, considering various factors such as their living environment.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.