0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Inside a Microapartment: Design Solutions to Support Future Sustainable Lifestyles

Autor(en):

Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Buildings, , n. 12, v. 11
Seite(n): 654
DOI: 10.3390/buildings11120654
Abstrakt:

The purpose of this study wass to assess the interior design solutions of residential microflats built in large European cities in countries from the Organisation for Economic Co-operation and Development (OECD). A sample consisting of thirty representative microflats with a floor area below 35 m² was selected for the study. The flats were intended for either permanent or temporary occupancy and were built over the past fifteen years. The research field covered several large European cities, where demand for such units is high. Comparative analyses of different microflat interior design models were performed. The objective of the study was to determine which contemporary microflat interior design solutions (such as space layout, furniture layout, and design, color, and material design) are optimal and the most commonly used. Sets of design solutions applied in microflats were collected and documented. The study used a range of research methods, including a review of the literature, websites, field research, and comparative analysis. The set of presented interior design solutions and the conclusions drawn from the analyses can be useful to architects and interior designers who design microflats and residential units with greater floor areas, or flats where effective use of floor area is crucial (e.g., student housing). It is also worth mentioning that the existing literature on microflats focuses primarily on the United States and Australia and not Europe, and discusses the economics and ecology of inhabiting microflats.

Copyright: © 2021 by the authors; licensee MDPI, Basel, Switzerland.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10646965
  • Veröffentlicht am:
    10.01.2022
  • Geändert am:
    10.01.2022
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine