Innovative Three-Row Pile Support System of Ultra-Deep Foundation Pit and Cooperative Construction Technology with Basement for High-Rise Tower Structures
Autor(en): |
Yuxuan Zhu
Huilai Qin Xiangping Zhang Desheng Wei Lei Zhai Lixin Hu |
---|---|
Medium: | Fachartikel |
Sprache(n): | Englisch |
Veröffentlicht in: | Buildings, 27 März 2024, n. 4, v. 14 |
Seite(n): | 1003 |
DOI: | 10.3390/buildings14041003 |
Abstrakt: |
This paper proposes the structural design and calculation model of stepped three-row pile and verifies its antioverturning and antisliding stability, based on the Xinghe Yabao deep foundation pit project in Shenzhen, China. The three-row pile model is constructed using finite element software, and the force and deformation of the piles are analyzed. The influence of the direction of the prestressing anchors on the support effect of the three-row pile is investigated by simulating the prestressing anchors in three directions: oblique, horizontal, and vertical. The results show that the combined support effect of the oblique anchor and the three-row pile is the most effective, resulting in the smallest deformation, followed by the horizontal anchor, and the vertical anchor produces the largest deformation. Finally, the innovative construction method of the three-row pile removal and the basement top-down construction method is proposed. The three-dimensional model of the tower building and the basement is established by the finite element software to simulate the structural grading load and the cooperative construction of the supporting structure and the basement structure. The research results have greater engineering application value and significant economic benefits, which could provide reference and guidance for the design and construction of deep foundation pits in similar projects. |
Copyright: | © 2024 by the authors; licensee MDPI, Basel, Switzerland. |
Lizenz: | Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden. |
20.29 MB
- Über diese
Datenseite - Reference-ID
10773579 - Veröffentlicht am:
29.04.2024 - Geändert am:
05.06.2024