Influence of the Vertical Component of Yangbi Ground Motion on the Dynamic Response of RC Frame and Brick-Concrete Structure

An earthquake of magnitude 6.4 occurred in Yangbi County, Yunnan Province on 21 May 2021, with a focal depth of 8 km, and strong ground motion with vertical components was monitored by Yangbi station (53YBX). A total of 14,122 houses were damaged in Yangbi in the earthquake, and 232 of them collapsed. Vertical components of ground motions have been gained more attention for its effect on structure’s seismic response in epicenter or near-fault regions at present. Taking the three earthquake ground motions of Yangbi, Chi-Chi, and Loma Prieta as inputs, and modeling based on Perform-3D, this research carried out the seismic dynamic time history analysis of an RC (reinforced concrete) frame structure and a brick-concrete structure under both horizontal and vertical working conditions. The results showed that vertical components of the three ground motions had no evident impact on the top horizontal displacement and acceleration of the two types of structures. Among the three ground motions, the vertical component of Yangbi ground motion has largely influenced the top vertical displacement, acceleration, and axial force of the frame column bottom (or masonry wall bottom). The vertical component had different amplification effects on the axial pressure and the bending moment of a single column at the bottom of the RC frame structure, thus causing resonance amplification effect of the brick-concrete structure floors and amplifying the vertical acceleration of the top floor. In addition, it considerably increase the maximum axial tensile strain of masonry walls and the possibility of faster tensile failure of the brick-concrete structure. Influence of vertical ground motion on the bearing capacity of RC frame structure’s columns and the brick-concrete structure’s masonry walls should not be ignored. The results of the research may provide a reference for the earthquake-resistant design of building structures, especially the earthquake-resistant design considering the vertical seismic effect.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.