0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Influence of Objective Functions in Structural Damage Identification Using Refined and Simple Models

Autor(en):

Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: International Journal of Structural Stability and Dynamics, , n. 4, v. 9
Seite(n): 607-625
DOI: 10.1142/s021945540900320x
Abstrakt:

The most usual approach for solving damage identification problems is the use of the finite element (FE) model updating method. To apply the method, a minimization of an objective function measuring the fit between measured and model predicted data is performed. Then, the success of the procedure depends strongly on the accuracy of the FE model and the choice of a suitable objective function. Although detailed FE models provide an accurate means for calculating the dynamic response of the structure, their size and complexity involve a large number of parameters to be updated and a high computational cost. In order to shorten the computational time, more simplified and practical models able to model the global dynamic response of the structure accurately would be desirable. Furthermore, working with several objective functions instead of only one would increase the robustness and performance of the procedure. In this paper, a multi-objective simple beam model is proposed and compared with a more refined model based on plane elements. Furthermore, in the multi-objective framework, different combinations of objective functions are studied. The reliability and effectiveness of the proposed model has been evaluated in a damage detection problem of a reinforced concrete frame experimentally tested under different levels of damage.

Structurae kann Ihnen derzeit diese Veröffentlichung nicht im Volltext zur Verfügung stellen. Der Volltext ist beim Verlag erhältlich über die DOI: 10.1142/s021945540900320x.
  • Über diese
    Datenseite
  • Reference-ID
    10353060
  • Veröffentlicht am:
    14.08.2019
  • Geändert am:
    14.08.2019
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine