Influence of Microscopic Parameters on the Stress-Strain Relation in Rocks

Macromaterial properties should correspond to the mesoscopic parameters simulated in practical engineering problems. Discrete element contains a variety of particle models and its corresponding mesoscopic parameters, and the one-to-one relationship between the mesoscopic parameters and macroscopic parameters is difficult to establish. This paper studies the influence of microscopical characteristic parameters, such as particle contact stiffness ratio, parallel bond stiffness ratio, particle contact modulus, and parallel bond elastic modulus, on the stress-strain relation in rocks, which shows that (1) The range of particle contact stiffness ratiok_n/k_slargely varies, but the stress-strain relation curve is relatively small. The particle contact stiffness has less influence on the elastic modulus of the simulated specimens thank_n/k_s. (2) Before the failure of the specimen, the axial strain corresponding to the peak compressive strength increases with the increase in the stiffness ratio_kn¯/_ks¯of the parallel bond. (3) The particle contact modulusE_chas a great influence on the elastic modulus of sandstone and is characterized by the increase in the particle contact modulusE_c, corresponding axial strain for the peak compressive strength decreases, and the slope of the stress-strain relationship curves before damage increases. (4) The elastic modulus of the parallel bond greatly influences the uniaxial compressive strength, and the relationship between them is proportional.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.