Influence of Excavation Radius on Behavior of Circular Foundation Pits Supported by Prefabricated Recyclable Structures: Full-Scale Experimental and Numerical Analysis

A foundation pit’s excavation area, which is determined by its radius in a circular foundation pit, exerts a considerable influence on the pit’s behavior. Using a full-scale experiment on a circular foundation pit retained by a prefabricated recyclable supporting structure (PRSS), this study develops a series of axisymmetric numerical models to systematically investigate the influence of excavation radius on the pit’s deformation, stress, and stability. Furthermore, simulation results from axisymmetric models are compared with those from plane strain models to illustrate the influence mechanism. The results show that at a given excavation depth, the deflection and bending moments of the supporting piles, the earth pressure on the non-excavation side, and ground surface settlement increase with the enlarged excavation radius, but the increase rate progressively decreases. However, the foundation pit’s safety factor decreases with an increasing excavation radius and gradually stabilizes. When the excavation radius exceeds 50 m, its influence on the foundation pit’s behavior significantly diminishes. The axisymmetric model results closely approximate those from the plane strain models, suggesting that the spatial arching effects of the circular foundation pit can be disregarded.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.