Influence of Different European Code Provisions for Capacity Design on the Seismic Performance of Reinforced Concrete Frames

Performance-based seismic codes ensure proper inelastic behaviour of reinforced concrete frames through capacity design, among others. This strategy relies not only on avoiding brittle failures and providing ductility to plastic hinges but also in their distribution within the frame aimed at a greater number of storeys involved in the eventual collapse mechanism. Although codes are generally in agreement to some basic principles in order to ensure capacity design, they show some discrepancies regarding the specific strategies. In this paper, capacity design provisions proposed by some European current codes—Eurocode 8, Italian NTC, and Spanish NCSE-02—are compared, and their effectiveness is discussed. The alternative formulation proposed by Italian code for “strong column–weak beam” turns out to be not suitable under specific circumstances, such as with large gravity loads or significant cantilever deformation in lower storeys. Regarding the value of axial load in columns to be considered for the calculation of shear and moment capacities, provisions in the three codes could eventually cause unconservative design for perimeter columns. The Spanish whole set of provisions is proved to not be effective due to their different fundamentals—they are based on overstrength instead of capacity. For all the three cases, some alternative procedures are suggested in this work.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.