Influence of Cement Type and Admixtures on Rheological Properties of Cement Paste / Cheminiu Imaišu Poveikis Reologinems Cemento Tešlos Savybems
Autor(en): |
Mindaugas Macijauskas
Albinas Gailius |
---|---|
Medium: | Fachartikel |
Sprache(n): | Englisch |
Veröffentlicht in: | Engineering Structures and Technologies, Mai 2014, n. 4, v. 5 |
Seite(n): | 175-181 |
DOI: | 10.3846/2029882x.2014.912431 |
Abstrakt: |
The article aims to research the influence of the chemical admixtures on the rheological properties of Portland cement paste and determine their impact on the effectiveness of hydration induction period. Materials used in the study: Portland cement CEM I 42.5 (N and R early strength), limestone Portland cement CEM II/A-LL 42.5 N, plasticizer Centrament N3, the latest generation superplasticizer MC-PowerFlow 3140 and water. Investigations focused on effects of Plasticizer and superplasticizer on water and cement (W/C) ratio and Portland cement paste flow characteristics. Portland cement pastes with the same watercement ratio with and without chemical admixtures were tested. Investigations were carried out using a Suttard viscometer and rotation viscometer Rheotest NH 4.1 with coaxial cylinders. It was observed that viscosity of Portland cement paste can be controlled by chemical admixtures during the hydration induction period. Investigations of effectiveness of the chemical admixtures on the rheological properties of the Portland cement pastes, comparing it with a control composition of the Portland cement paste were provided in the article. Diagrams show changes of the viscosity of the Portland cement pastes depending on the type and amount of the used chemical admixtures. Obtained results were compared with the same consistence without admixtures. After making the regressive analysis of research results of Portland cement paste with and without chemical admixtures, empirical equations were produced. |
- Über diese
Datenseite - Reference-ID
10326013 - Veröffentlicht am:
21.07.2019 - Geändert am:
21.07.2019