Inertial Measurement Unit- and Time Series Approach-Based Motion Trajectory Reconstruction of the Safety Rope Fastening Behaviour

Monitoring workers’ safety compliance is critical to construction accident prevention. However, most of the previous research focuses on checking the entry of workers wearing safety belts and the monitoring of the fastening action of safety rope screw buckles has not yet been considered. In this paper, a reconstruction method for the safety rope fastening behaviour of workers is proposed based on inertial measurement units (IMU) and a time series approach to monitor safety belt use. The proposed method was applied and evaluated through on-site construction experiments. The experimental results show that the acceleration, angular velocity, and magnetic induction intensity data obtained by the inertial measurement unit exhibit clear behavioural characteristics during safety rope fastening. The trajectory of the safety rope can be reconstructed and monitored through inertial measurement units and a time series approach. The results of this study will contribute to the reconstruction and monitoring of safety rope attachment trajectories for scaffolding workers working at heights in order to prevent falls at construction sites.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.