Improving bond strength and mass transport properties of spacer-concrete interface with textured spacers
Autor(en): |
F. Muslim
H. S. Wong T. K. Q. Chiu N. R. Buenfeld |
---|---|
Medium: | Fachartikel |
Sprache(n): | Englisch |
Veröffentlicht in: | Materials and Structures, 24 August 2021, n. 5, v. 54 |
DOI: | 10.1617/s11527-021-01782-y |
Abstrakt: |
Spacers are important devices used in all concrete structures to support reinforcing steel and achieve the required cover. However, spacers induce a weak, porous and microcracked interface that facilitates ingress of aggressive agents. This paper aims to address the problem by developing a method to produce cementitious spacers with a range of small-scale surface textures including grooves, squares, rectangles, hemispheres and pyramids. The textured spacers were cast in Portland cement mortar or concrete, cured up to 28 days, and tested for tensile bond strength, accessible porosity and mass transport properties. The properties were correlated to surface characteristics to establish the effects of texture on spacer-concrete interface. Results show that textured spacers promote mechanical interlocking with concrete, thereby increasing bond strength, resistance against microcracking and pressure-induced flow. The use of certain textures can compensate for the negative effects of spacers, achieving similar bond strength and permeability to monolithic concrete without the interface. |
Copyright: | © The Author(s) 2021 |
Lizenz: | Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden. |
3.17 MB
- Über diese
Datenseite - Reference-ID
10630008 - Veröffentlicht am:
01.10.2021 - Geändert am:
05.10.2021