High-speed train induced vibration measurements in fresh tunnel shotcrete layer

Existing coastal railway track has been undergoing for renovation and improvement work aiming to raise train speed and shorten the travel time between Turku and Helsinki. The track has 16 existing tunnels of which 14 has been renovated between 2019 and 2021. Majority of the tunnels have been reinforced by system and shotcrete and rock bolts. The water seepage control has been solved by using PE sheets with additional 100 mm fibre shotcrete layer as fire protection layer. After the track and tunnel improvements, the track was test driven with two different trains: a high speed SM train unit and a two storey intercity train unit. The speeds used were higher than the current allowed speeds aiming to study the potential to increase the travel speed. One of the most restrictive parameters for the increase is the pressure shock of high speed train entering the tunnel. Too high pressure shock will cause inconvenience for the passengers and can cause damage in tunnel lining structures. Also currently no clear guideline exists what speed limits need to be used for trains entering tunnels with curing shotcrete. To study these matters the test run train units were instrumented including with pressure sensors. The conclusions about the pressure shocks are investigated briefly in the paper.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 3.0 (CC-BY 3.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.