Green Residential Building Design Scheme Optimization Based on the Orthogonal Experiment EWM-TOPSIS

A multi-objective decision method is proposed based on the combining orthogonal test, entropy weight method (EWM) with TOPSIS (technique for order preference by similarity to an ideal solution) in this article. The method is more objective and efficient than traditional methods in the design of green residential buildings. A villa in Nanjing was taken as an example, and the cost, building energy consumption, and daylight factors were used as decision-making indexes. A total of six control factors were selected: terrain elevation, window area, building orientation, the opening ratio of exterior windows, roof structure, and window glass material. Each factor was designed with three levels. First, a design scheme index system was constructed, and the orthogonal experimental design was used to select representative design schemes. Then, the EWM and the TOPSIS method were used to determine the weight of each index, a comprehensive evaluation of the residential building design scheme was conducted, and, finally, the optimal scheme was confirmed via range analysis. The results show that the multi-objective decision-making model based on the orthogonal experiment EWM-TOPSIS is suitable for green residential building design and the optimal solution obtained is “15 m elevation, a 1200 × 1500 mm size vacuum glass, an orientation of 170° and an external window opening ratio 45% with a 40 mm thick expanded insulation board roof”.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.