The generalized E-DVA method: a new approach for multi-modal pushover analysis under multi-component earthquakes with local variables maximization

Pushover analysis is a common nonlinear static procedure, performed to evaluate seismic response of civil structures. This approach allows considering the structural nonlinear behavior under earthquake loading in a simplified yet effective way; however, in its classic formulation, it is limited by restrictive and unrealistic assumptions. Thus, the basic method is inadequate for the accurate analysis of buildings without a vertical plane of symmetry and/or for multi-component earthquakes, where torsion effects cannot be neglected. Furthermore, standard pushover analysis only comprises one dominant mode of vibration; higher modes, and therefore their effects, are not accounted for. For all these reasons, the standard technique is generally not considered suitable for the assessment of buildings at high risk of natural-technological (NaTech) events, such as nuclear facilities in areas of high seismic activity. To overcome these limitations, a multi-modal pushover analysis procedure is here tested and validated on the data from a non-symmetric structure (the SMART case study) under multi-component earthquakes. In detail, the procedure applies a linear combination of modal load patterns, defined according to the well-established Direct Vectorial Addition (DVA) method. With respect to other existing multi-modal pushover analysis techniques, elliptical response envelopes are employed to calculate the corresponding combination factors. Innovatively, the identification of the dominant modes for the load pattern is not limited to the classic maximization of the forces at the basis of a structure but rather generalized to shear and displacement maximization at different heights and locations throughout the whole structural frame.