0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Fly Ash and Natural Pozzolana Impacts on Sustainable Concrete Permeability and Mechanical Properties

Autor(en): ORCID



ORCID


Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Buildings, , n. 8, v. 13
Seite(n): 1927
DOI: 10.3390/buildings13081927
Abstrakt:

This paper studied the effect of fly ash (FA) and natural pozzolana (NP) as partial cement substitutes on sustainable concrete permeability and mechanical and microstructural properties. Batches with 10, 20, 30, 40, and 50% FA and NP replacements for cement were prepared and tested for compressive strength after 7, 28, and 56 curing days and for flexural strength after 28 curing days. Permeability testing was conducted on all samples. A qualitative microstructural analysis was performed using scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX). The mechanical properties results showed slight strength improvements when replacing the cement with low percentages of the pozzolanic materials. The compressive strengths of the batches with 10% FA and NP replacements of cement showed compressive strength increases of 11.63 and 8.75%, respectively, compared to that of plain concrete. On the other hand, the flexural strength for the batches with FA replacement of cement achieved at least a 15.6% increase compared to that of the control. Moreover, FA and NP replacement of cement had a positive impact on batch permeability, with decreased permeability values reaching 78.3 and 56.5%, respectively, compared to that of the control. Furthermore, the microstructural analysis indicated that adding FA and NP would enhance cement hydration by the formation of dense hydration products such as calcium–silicate–hydrate (C-S-H) crystals, which increased hardened concrete strength. Finally, the cost analysis showed that the batch with a 10% FA replacement of cement is the ideal one in this study.

Copyright: © 2023 by the authors; licensee MDPI, Basel, Switzerland.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10737322
  • Veröffentlicht am:
    02.09.2023
  • Geändert am:
    14.09.2023
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine