0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Fatigue behavior of girder with flange thickness transitions and cope holes ‐ tests and simulations

Autor(en): (Ruhr‐University Bochum Germany)
(Ruhr‐University Bochum Germany)
(Graz University of Technology Austria)
(Graz University of Technology Austria)
(Graz University of Technology Austria)
Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: ce/papers, , n. 3-4, v. 6
Seite(n): 2498-2503
DOI: 10.1002/cepa.2401
Abstrakt:

The fatigue behavior of steel girders with flange thickness transition and cope hole has been experimentally analyzed with two large‐scale cyclic tests. Special attention is paid to the arising and interacting local effects. The fatigue tests have been conducted in a four‐point bending setup. Both girders have shown fatigue‐induced failure at the flange butt welds at the thickness transition. The experimental results are presented in terms of fatigue life, differentiating the initiation and propagation life, as well as observed crack position and shape. Moreover, an advanced fatigue life prediction using the Two‐Stage‐Model is applied to the tested girders. The Two‐Stage‐Model applies the Strain‐Life and the Crack Propagation Approach to assess the total fatigue life. Thereby, the number of cycles as well as the crack shape show a good agreement with the experimental results and proves the applicability of the Two‐Stage Model for an advanced fatigue assessment.

Structurae kann Ihnen derzeit diese Veröffentlichung nicht im Volltext zur Verfügung stellen. Der Volltext ist beim Verlag erhältlich über die DOI: 10.1002/cepa.2401.
  • Über diese
    Datenseite
  • Reference-ID
    10767343
  • Veröffentlicht am:
    17.04.2024
  • Geändert am:
    17.04.2024
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine