0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Autor(en):



Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Engineering Journal, , n. 4, v. 43
Seite(n): 287-302
DOI: 10.62913/engj.v43i4.886
Abstrakt:

Potential failure modes in moment resisting connections (MRCs) subject to seismic loads must be controlled, so that adverse modes such as brittle fracture are avoided and ductile modes develop in a predictable manner. To simulate volumetric imperfections in fillet welds, an unfused region was created by removing a section of the weldment, thus creating a full-depth lack of penetration imperfection. Five large-scale MRC specimens were tested, with these imperfections varying in both size and location. Critical "loss of area" parameters for establishing a threshold are determined for the minimum required deformation capacity of a connection and for establishing a threshold between desirable and undesirable failure mechanisms. Increasing the resistance to deformation in the panel zone is considered likely to provide enhanced weld performance. This paper also provides evidence and discussion of the effect of strong and very strong panel zones on the integrity of connection welds.

Structurae kann Ihnen derzeit diese Veröffentlichung nicht im Volltext zur Verfügung stellen. Der Volltext ist beim Verlag erhältlich über die DOI: 10.62913/engj.v43i4.886.
  • Über diese
    Datenseite
  • Reference-ID
    10782615
  • Veröffentlicht am:
    17.05.2024
  • Geändert am:
    17.05.2024
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine