Exploring the Impact of Rice Husk Ash Masonry Blocks on Building Energy Performance

Operational building energy consumption accounts for 55% of global energy consumption. Most of this is attributed to residential buildings, as they make up the largest building type when compared to the total building stock worldwide. As the building envelope is a major contributor to building energy performance, especially the external walls, its optimisation is therefore imperative to reduce energy consumption and carbon emissions. This study set out to assess the effects of waste material additions to external walls and their effect on building energy performance. This research aimed to critically investigate the effect of rice husk ash (RHA) masonry blocks on building energy performance when compared to conventional masonry blocks in tropical climates. A mix of methods, including experimental investigation and simulation studies, were employed for this study. Three variations of RHA block samples were created for this investigation: RHA 5%, RHA 10%, and RHA 15%. Using prototype buildings from the study context, the building simulation results helped quantify the impact on building energy performance from the reuse of rice waste. The largest improvement to the building fabric was recorded with the RHA15% blocks, which resulted in a 9.9% and 11.3% reduction in solar heat gains through the external walls for the selected bungalow and duplex/storey building, respectively. This resulted in a 6.55% and 4.2% reduction in cooling loads and a 4.1% and 2.8% reduction in carbon emissions, respectively, for the bungalow and duplex/storey building. The findings of this research will prove valuable to householders, researchers, architects, and policymakers in their decision-making processes. The findings will also be useful in introducing new methods that can be adopted for similar studies, bridging the knowledge gap while promoting a circular economy through the reuse of landfilled waste.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.