Experimental Study on the Seismic Performance of Socket Bridge Piers

In order to accelerate the construction of bridge substructure, a socket joint construction that does not require interfaces roughening between the precast columns and the reserved cavity of the precast foundation is raised in this paper. The seismic performance of such fabricated bridge piers was investigated by carrying quasistatic tests on socket circular pier specimens of different embedment depths with a compared cast-in-place pier specimen. The experimental results showed that the prefabricated piers with the embedment length larger than 1.0 times the column diameter, featuring smooth interfaces that was free of roughening, had a failure mode of bending damage as well as the cast-in-place component. As the embedment depth increases, the seismic performance indexes of the socket bridge pier, including bearing capacity, ductility, and energy dissipation capacity, are improved. The seismic performance indexes of a socket bridge pier specimen with an embedment depth of 1.5 times the column’s diameter in the test are better than the cast-in-place one.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.