Experimental Study on the Saturated Compacted Loess Permeability under K0 Consolidation

This paper investigates the permeability characteristics of compacted loess by focusing on the anisotropy parallel and perpendicular to the compaction. Three tests are conducted on compacted loess: triaxial permeability test under confining pressure consolidation, triaxial permeability test underK₀consolidation, and SEM test. Samples are maintained and tested at different dry densities under saturated conditions. The test results show that the saturated permeability coefficient of compacted loess is exponentially related to the initial dry density under both confining pressure consolidation andK₀consolidation. The fitting equation can estimate the saturated permeability coefficient of compacted loess at different depths. The horizontal saturated permeability coefficient of compacted loess is larger than that in the vertical direction, showing obvious anisotropy. The saturated permeability anisotropy ratio is linearly related to the initial dry density. Comparing and analysing the saturated permeability coefficient, the saturated permeability coefficient of compacted loess under theK₀consolidation condition is smaller than that under the confining pressure consolidation condition. Under the condition ofK₀consolidation, the connectivity of vertical and horizontal pores of compacted loess is weakened, the tortuosity is strengthened, and the void ratio is decreased.K₀consolidation makes the flake-, plate-, and needle-like particles in compacted loess rotate continuously parallel to the compaction surface, which enhances the orientation of particles and leads to the saturated permeability anisotropy increase. The research results provide the basis for water field analysis in loess filling engineering.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.