Experimental Study on the Damage Properties of Mechanical Properties of Saline Soil Under Different Influencing Factors
Autor(en): |
Fang Zheng
Wenqiang Li Zhanping Song Jiahui Wang Yuwei Zhang Junbao Wang |
---|---|
Medium: | Fachartikel |
Sprache(n): | Englisch |
Veröffentlicht in: | Buildings, 21 Januar 2025, n. 3, v. 15 |
Seite(n): | 324 |
DOI: | 10.3390/buildings15030324 |
Abstrakt: |
Influenced by factors such as the freeze–thaw cycle and water–salt migration, road construction in Uzbekistan’s highway project areas is prone to dissolution and subsidence, salt swelling, corrosion, and other engineering diseases. To investigate how various factors impact saline soils in Uzbekistan’s monsoon freezing zone, we conducted analyses of stress–strain curves, failure strength, and shear strength parameters of these soils through freeze–thaw (F-T) cycle tests and unconsolidated and undrained (UU) triaxial shear tests. The findings indicate that with the increase of salt content, the average reduction in the failure strength of saline soil was 15.8%, 6.3%, and 5.7%; with the increase of water content, the average reduction in cohesion was 10.8%, 44.1%, and 32.6%; and the internal friction angle increased with the increase of the number of F-T cycles and decreased with the increase of freezing temperature. Ultimately, we defined the rates of failure strength deterioration and cohesion damage in saline soil due to various factors, analyzing the destructive impacts of these factors. The results demonstrate a strong correlation between the curves of failure strength deterioration and cohesion damage ratios, indicating that the significant degradation of saline soil due to salt is primarily influenced by F-T cycles, with the extent of damage closely linked to water content. |
Copyright: | © 2025 by the authors; licensee MDPI, Basel, Switzerland. |
Lizenz: | Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden. |
4.65 MB
- Über diese
Datenseite - Reference-ID
10816172 - Veröffentlicht am:
03.02.2025 - Geändert am:
03.02.2025