0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Experimental Study of Wind Pressures on Low-Rise H-Shaped Buildings

Autor(en):

ORCID
ORCID

Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Buildings, , n. 3, v. 14
Seite(n): 762
DOI: 10.3390/buildings14030762
Abstrakt:

Recognizing the urgent need for mitigating global warming, natural ventilation presents a potential strategy to reduce cooling energy demands, enhance thermal comfort, and contribute to indoor air quality. H-shaped buildings are prevalent worldwide, and they constitute the majority of the social housing construction in Brazil. Research suggests that the inadequate design of these buildings can result in poor ventilation; however, investigations about their natural ventilation performance are limited. Thus, the present contribution aims to determine the impact of the geometric characteristics of H-shaped buildings on the pressure distribution through wind tunnel experiments. Three models were tested in the wind tunnel experiments, representing different proportions. Their scales were configured to comply with the 5% obstruction limit allowed for wind tunnel testing, which was performed for 20 wind attack angles. Moreover, a scour test was carried out to allow a better understanding of the wind flow. Python scripting was developed to automate data processing, which is openly available in this paper. The results indicate that the proportion of the model influences the pressure distribution on roofs and leeward walls. Additionally, the depth of the recessed cavity affects its side surfaces and can result in a mirrored behavior on the frontal face of deep cavities (i.e., the wind direction is 45°). The model height influences the windward surfaces in its lower portion, since taller models present a recirculation vortex that modifies the pressure near the ground.

Copyright: © 2024 by the authors; licensee MDPI, Basel, Switzerland.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10773755
  • Veröffentlicht am:
    29.04.2024
  • Geändert am:
    05.06.2024
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine