Experimental Study of a New Self-Centering BRB and Its Application in Seismic Resistance of Frame Structure
Autor(en): |
Yourong Lin
Zhi Zhou Maoyu Shen Jili Liu Wei Huang |
---|---|
Medium: | Fachartikel |
Sprache(n): | Englisch |
Veröffentlicht in: | Buildings, 21 Februar 2024, n. 3, v. 14 |
Seite(n): | 850 |
DOI: | 10.3390/buildings14030850 |
Abstrakt: |
In order to enhance the self-centering capacity of steel frame structures after earthquakes and reduce the tubes of traditional double-tube or triple-tube SC-BRB, an innovative single-tube self-centering buckling restrained brace (ST-SC-BRB) is proposed in this paper. Firstly, the structural configuration of the ST-SC-BRB component was described. Then, cyclic tests were conducted on one small-scaled BRB and one ST-SC-BRB with the same core steel plate. The test results indicate that the ST-SC-BRB specimen exhibits an excellent self-centering ability compared to the conventional BRB. However, their energy-dissipation capacities are still determined by the core steel plate. In addition, time–history analyses were conducted to evaluate the seismic performance of steel frame structures with BRBs and ST-SC-BRBs. The results suggest that the ST-SC-BRBs can effectively reduce the residual deformation of steel frame structures after earthquakes and contribute to the self-centering capacity of the steel frame structures. Finally, the influence of design parameters of ST-SC-BRB components on the seismic performance of steel frame structures was discussed. It is confirmed that the initial stiffness of the ST-SC-BRB component significantly influences the seismic response of the structure, while the self-centering ratio of the ST-SC-BRB component is a crucial factor in determining the residual deformations of the structure. |
Copyright: | © 2024 by the authors; licensee MDPI, Basel, Switzerland. |
Lizenz: | Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden. |
8.02 MB
- Über diese
Datenseite - Reference-ID
10773410 - Veröffentlicht am:
29.04.2024 - Geändert am:
05.06.2024