Experimental Investigation on the Response of Elliptical CFT Columns Subjected to Lateral Impact Loading

This study reports an experimental investigation on the impact behavior of elliptical concrete-filled steel tubular (CFT) columns subjected to lateral loading. A total of five CFT columns, including one circular cross-section and four elliptical cross-sections, were tested using a horizontal-impact-testing system. The influences of the impact velocity, the impact times, and the cross-section geometry on the dynamic response of the elliptical CFT columns were analyzed. The experimental results have shown that the specimens withstood the global displacements without the buckling of the steel tubes. The strain rates of the steel tubes in this paper were small. The impact velocity had significant influences on the impact load-time histories and energy absorption. Meanwhile, the impact times had little influence on the impact force and displacement at the same impact velocity. Circular CFT columns have the highest ductility and impact-energy-absorption capacity. Based on the finite element analysis software ABAQUS, the finite element models of the elliptical CFT columns under impact loads were established. The simulation results were in good agreement with the experimental results. Finally, the mechanical mechanism of the elliptical CFT columns under lateral impact was analyzed by the finite element model.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.