0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Experimental Investigation of Self-Compacting Concrete with Recycled Concrete Aggregate

Autor(en):
ORCID
ORCID
ORCID

Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Buildings, , n. 4, v. 13
Seite(n): 856
DOI: 10.3390/buildings13040856
Abstrakt:

Due to the depletion of natural aggregates and raw materials for contemporary construction, the construction and demolition waste existing in old concrete structures is an imperative problem. Cutting down on exploiting natural aggregates and reusing construction and demolition waste in the concrete industry are solutions to this problem. This paper investigated the replacement of natural coarse aggregate (NCA) with recycled concrete aggregates (RCA) with different ratios (0%, 50%, 75%, and 100%) in producing self-compacting concrete (SCC). Different components of supplementary cementitious materials (SCMs), such as nano-silica (NS), fly ash (FA), and metakaolin (MK), as well as PVA fibers, were incorporated into the SCC mixtures. The fresh properties (slump flow, V-funnel, and L-box test) and hardened properties (compressive strength, splitting tensile strength, and flexural strength), as well as the flexural behavior of SCC beams (load-carrying capacity, crack pattern, mid-span deflection, and flexural stiffness), were studied for all SCC mixes. The results of fresh and hardened concrete confirmed that it is possible to produce SCC with a 100% replacement of RCA with minimal effects on the concrete properties. The mixture of SCC with 100% RCA replacement, 20% MK, and 22% FA was the optimum mixture with acceptable fresh properties that complied with the EFNARC specifications. For 100% RCA replacement, the compressive strength was reduced by 8.20%, and the ultimate load and flexural stiffness increased by 3.20 and 16.25%, respectively, compared with the control mixture.

Copyright: © 2023 by the authors; licensee MDPI, Basel, Switzerland.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10728531
  • Veröffentlicht am:
    30.05.2023
  • Geändert am:
    01.06.2023
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine