Experimental Investigation of Concrete Crack Depth Detection Using a Novel Piezoelectric Transducer and Improved AIC Algorithm

Ultrasonic pulse velocity (UPV) has shown effectiveness in determining the depth of surface-open cracks in concrete structures. The type of transducer and the algorithm for extracting the arrival time of the ultrasonic signal significantly impact the accuracy of crack depth detection. To reduce the energy loss in piezoceramic-based sensors, a high-performance piezoceramic-enabled smart aggregate (SA) was employed as the ultrasonic transducer. For the extraction of ultrasonic signal arrival time in concrete, a novel characteristic equation was proposed, utilizing the slope of the signal within a shifting window. This equation was subsequently applied to modify Maeda’s function, with the arrival time of ultrasonic waves defined as the moment corresponding to the minimum Akaike information criterion (AIC) value. Six plain concrete specimens with artificial cracks were prepared and one reinforced concrete beam with a load-induced crack was used for validation. The average deviation of the testing of 492 points on 12 human-made cracks was around 5%. The detection results of 11 measurement points of a crack in a reinforced concrete beam show that three measurement points have a deviation of about 17%. The experimental results demonstrated that the novel piezoelectric transducer and improved AIC algorithm exhibit high accuracy in detecting the depth of concrete cracks.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.