• DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke




Experimental and Numerical Investigation of Composite Action of Steel Concrete Slab


Medium: Fachartikel
Sprache(n): en 
Veröffentlicht in: Procedia Engineering, , v. 40
Tagung: Steel Structures and Bridges 2012
Seite(n): 143-147
DOI: 10.1016/j.proeng.2012.07.070
Abstrakt: Thin-walled cold formed corrugated steel sheet with embossments, used in composite steel concrete slab, is a modern and effective construction. The steel sheet is used as a permanent formwork and as a load bearing member after hardening of concrete as well. The prestressed embossments are crucial to ensure a composite action. However, its load bearing capacity is influenced by many factors and it is not possible to be determined without using expensive and time consuming tests of the whole slab in laboratory. This paper is focused on composite action using this type of shear connection and its behaviour under different types of loading. Four-point bending tests and vacuum tests were performed on the whole span slab. Additional small-scale shear test help us to understand the shear behaviour of thin-walled steel sheet in ultimate limit state. The data from the tests make possible to set up and calibrate numerical models. These models can then facilitate pointing out the main factors which influence the load bearing capacity of this type of structure.
Copyright: © 2012 Published by Elsevier Ltd.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung - Nicht-kommerziell - Keine Bearbeitung 3.0 Unported (CC BY-NC-ND 3.0) veröffentlicht und darf bei Nennung des Urhebers unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht und nicht kommerziell genutzt werden. Bearbeitungen sind nicht erlaubt.


  • Über diese
  • Reference-ID
  • Erstellt am
  • Geändert am