0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Experimental and Analytical Study on Mechanical Properties of High Rock Temperature Diversion Tunnel

Autor(en):




Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Advances in Civil Engineering, , v. 2019
Seite(n): 1-11
DOI: 10.1155/2019/9537153
Abstrakt:

The high temperature of rock used in different working conditions has a significant effect on the deformation characteristics and the mechanics of tunnel lining support structure. A test using a laboratory model is designed to study the quantitative relationship between the temperature difference and the support force. Through the laboratory model test, the strain and stress variation characteristics of the supporting structure of a water diversion tunnel under different surrounding rock temperatures and different water temperatures were simulated. The variation characteristics of the supporting structure under various working conditions, such as a different initial temperature field, different crossing water temperature of the diversion tunnel during runtime, and repairing period after the water is emptied, were analyzed. The relationship between the high-temperature difference between the inner and outer walls of the tunnel lining support structure and the internal temperature stress of the supporting structure was obtained and compared with the results from numerical experiments. The test results showed that a high circumferential tensile stress is created in the support structure of the high-temperature diversion tunnel due to the temperature difference between the inner and outer walls of the support structure caused by water going through the high-temperature diversion tunnel. The radial compressive stress increases by 45–50%, and the circumferential tensile stress increases by 40–60%. The results provide references for the design of the support structure in a high-temperature tunnel.

Copyright: © 2019 Xianchun Yao et al.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10311095
  • Veröffentlicht am:
    04.04.2019
  • Geändert am:
    02.06.2021
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine