0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Experimental Analysis and Failure Criterion of Plain Concrete Subjected to Biaxial Loading under Fixed Lateral Loading

Autor(en):


Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Advances in Civil Engineering, , v. 2019
Seite(n): 1-12
DOI: 10.1155/2019/7059475
Abstrakt:

By using a rock true triaxial apparatus hydraulic servo machine, biaxial loading experiments including biaxial compression-compression and biaxial compression-tension with fixed lateral loading on plain concretes were conducted and the stress-strain curves of plain concrete under various stress ratios were obtained. After determining the peak principal stress, the damage modes of plain concrete under various stress ratios were analyzed and the law of strength in the principal stress direction was studied as well. The experimental findings show that, under the fixed lateral loading, the failure modes of plain concrete under biaxial compression-compression and biaxial compression-tension are very similar to those under the equal proportional loading, but with higher amplitude of variation. In this paper, Kupfer's classical failure criterion was applied to verify the experimental data and the predicted biaxial loading on plain concrete under fixed lateral loading and was regarded as relatively conservative. Meantime, based on Kupfer's failure criterion and octahedral stress space, two different failure criteria had been proposed and verified. The results show that the proposed failure criteria have good applicability. The failure mechanism under fixed lateral loading was discussed and compared with that under the equal proportional loading method. This research is meaningful to plain concrete engineering application and calculation.

Copyright: © 2019 Zhenpeng Yu et al.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10298592
  • Veröffentlicht am:
    29.01.2019
  • Geändert am:
    02.06.2021
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine