Evaluation of the Szapáry Long-Span Box Girder Bridge Using Static and Dynamic Load Tests

This paper presents the results of a recent field test carried out before the opening phases of the Szapáry motorway bridge across the Tisza River in central Hungary. The evaluation test was based on static and dynamic load tests that provided information on deflection, stresses, and dynamic mode shapes along the bridge. The structure has two large continuous independent steel box girders that cover spans across the floodplain and river. Various configurations of truck loading applied up to 6400 kN of loading on the deck. During the static tests, string potentiometers recorded deflections at mid-span. Additionally, strain gauges enabled strain/stress measurements at the mid-point of the longest span and directly above one support. Dynamic loadings showed variation in deflection response due to vehicle speed, and ambient vibration testing led to determining vibration modes and frequencies. A three-dimensional finite-element model produced similar deflections, stresses, and modal behavior. Measured and modeled deflections and stresses indicated that the bridge performed within design margins. The testing and analysis results will be part of a future program assessing conditioned-based maintenance.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.