Evaluation of Progressive Collapse Performance in Double layer Diamatic Domes

Double-layer spatial domes are one of the most common spatial structures, the stability and progressive collapse of which are of great importance in design, construction and maintenance of such special structures. In this paper considering three loading cases and two types of support conditions, the collapse behaviour of double layer Diamatic dome has been investigated utilizing non-linear static analysis and alternate path method usage. In order to modelling compressive member behaviour, effective buckling modes have been obtained by eigenvalue buckling analysis for all of the members. Behaviour of compressive members has been obtained via definition of initial imperfection and non-linear static analysis. Riks arc-length method has been utilized for non-linear static analysis. The numerical results have indicated that reducing the number of the supports and focusing  of load in a local area of the dome extremely impact on its vulnerability to failure, as in similar loading condition, decreasing the number of the supports reduces the capacity of damage resistance in spatial domes up to 50 percent. Investigating some models has shown that removing the critical members of the top layer has little effect on load-bearing capacity of the dome and it causes a slight failure in the structure. In this condition, structural redundancy can be considered equal to static indeterminacy. Load bearing capacity of the structure decreased up to 39 percent when compressive members of the web and bottom layers were removed. In this condition, the structure failure is considered moderate.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.