• DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Evaluation of Nonlinear Behavior of Reinforced Concrete Frames by Explosive Dynamic Loading Using Finite Element Method

Autor(en):


Medium: Fachartikel
Sprache(n): en 
Veröffentlicht in: Civil Engineering Journal, , n. 12, v. 3
Seite(n): 1198
DOI: 10.28991/cej-030949
Abstrakt:

These days, due to the unpleasant spread of the threat imposed to human life by explosion, the analysis and designating of important structures such as military, governmental and fundamental, and utilities against explosive loading is not anymore a costly conservatism but an inevitable necessity. In this study, the nonlinear behavior of the fortified concrete walls by various carbon fiber reinforced polymers (CFRP) such as glass, carbon and Aramid against the load generated by the explosion wave is investigated by the use of ABAQUS finite element software. In this study, the explosive load, base conditions, wall dimensions, and the features of the material are considered to be the same. The state and the amount of distribution of destruction parameters, tension and displacement in the walls were calculated and the critical areas were identified. Other Two 2 and 4 story models were investigated to examine the frame height and different arrangements of composite fiber reinforcing polymer (CFRP). Similarly, in order to obtain more accuracy in the results, nonlinear behavioral models of concrete and nonlinear plastic damage to concrete have been applied. A 4-node Shell element was used for meshing. The results indicated that, in the reinforced model, about 30% of decrease in the base cutting power is observed, and the reduction of the values for maximum displacement and maximum stress outputs are 30 percent and 45 percent respectively.

Copyright: © 2018 Seyed Mahdi Seyed Kolbadi, Heydar Davoodian, S.Mohamad S.Kolbadi
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10341098
  • Veröffentlicht am:
    14.08.2019
  • Geändert am:
    02.06.2021