Evaluating the Performance of Lateritic Soil Stabilized with Cement and Biomass Bottom Ash for Use as Pavement Materials

From the perspective of sustainable waste management and its environmental impact, waste biomass bottom ash (BA) remains problematic and challenging to use as a recycling material for civil engineering infrastructures. This study evaluated the performance of lateritic soil (LS), stabilized with cement and biomass BA, as a subbase material. BA has been considered a replacement material in LS prior to the introduction of hydraulic cement stabilization means. The geotechnical engineering tests comprised the modified Proctor test, the California Bearing Ratio (CBR) test, and the unconfined compression test. X-ray fluorescence (XRF) and X-ray diffraction (XRD) tests were conducted to investigate the mineralogical properties of the stabilized soil samples. The leachate test was performed with a permeability mold to measure the release of heavy metals. Finally, the benefits of using the stabilized subbase material were assessed using the mechanistic–empirical (M–E) pavement design approach. Based on the results obtained, the strength and stiffness characteristics of the stabilized soils indicate that the efficiency of the mix satisfied the Thailand highway specification. The admixture of 80% BA and 5% cement is suggested for use as a soil–cement subbase material for flexible pavements, due to its good engineering and environmental properties. The results of the M–E design demonstrate the effectiveness of the stabilized soil presented herein. The study’s outcomes are predicted to promote the utilization of waste BA as a promising pavement material.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.