Equivalent global sway imperfections for use in design by GMNIA
Autor(en): |
Hou Un Chan
(Imperial College London London UK)
Fiona Walport (Imperial College London London UK) Leroy Gardner (Imperial College London London UK) |
---|---|
Medium: | Fachartikel |
Sprache(n): | Englisch |
Veröffentlicht in: | ce/papers, September 2023, n. 3-4, v. 6 |
Seite(n): | 1655-1660 |
DOI: | 10.1002/cepa.2394 |
Abstrakt: |
Three types of geometric imperfection need to be considered in the design of structural systems: global frame out‐of‐plumbness, also referred to as sway imperfections, member out‐of‐straightness, also known as bow imperfections, and local cross‐section imperfections. For modelling convenience, equivalent geometric imperfections are often employed to account for the combined influence of initial geometric imperfections and residual stresses. For design by geometrically and materially nonlinear analysis with imperfections (GMNIA), amplitudes for equivalent bow imperfections for members are provided in prEN 1993‐1‐14; however, no provisions exist for global sway imperfections. Therefore, equivalent sway imperfections suitable for use in the design of steel structures by GMNIA, expressed by the out‐of‐plumbness Φ0,GMNIA are established herein. Two proposals for calculating Φ0,GMNIA are presented: (1) Φ0,GMNIA = Φ0,geom + α/100 with Φ0,geom representing the amplitude of the pure geometric sway imperfection, and (2) Φ0,GMNIA = α/50. In both proposals, the varying influence of residual stresses from different cross‐section geometries and axes of bending is captured by the imperfection factor α, as defined by the buckling curves in EN 1993‐1‐1 for carbon steel and EN 1993‐1‐4 for stainless steel, respectively. |
- Über diese
Datenseite - Reference-ID
10767181 - Veröffentlicht am:
17.04.2024 - Geändert am:
17.04.2024