0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Enhancing the Surface Structure of Public Filler and Macroscopic Properties of Recycled Cement Mortar Using Polyethyleneimine

Autor(en):



ORCID

Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Buildings, , n. 9, v. 14
Seite(n): 2856
DOI: 10.3390/buildings14092856
Abstrakt:

This study introduces an innovative approach by modifying a commonly used filler with a natural compound, PEI. Fine aggregates within the filler were treated with different contents of PEI solutions. This research thoroughly examined the filler’s pore structure, mineral composition, physical characteristics, and surface morphology. Additionally, this study explored the effects of PEI-treated fine aggregates on the macroscopic features of recycled cement mortar, focusing on aspects like flowability, compressive strength, capillary water absorption, and chloride ion permeability. The findings revealed that treating the fine aggregates with PEI decreased the pore volume by up to 28.2% compared to untreated samples. This improvement in the microstructure may originate from the formation of calcite and its by-products, which occupy the pores with nanoparticles generated in situ. Furthermore, the modification with polyethyleneimine resulted in a wavy, plate-like structure that not only enhanced the surface morphology but also improved the compressive strength and chloride ion permeability. Furthermore, it significantly reduced capillary water absorption by 32% to 51%, thereby enhancing the material’s durability. The present study underscores the superior advantages of PEI modification as a promising strategy to enhance the viability of public fine aggregates.

Copyright: © 2024 by the authors; licensee MDPI, Basel, Switzerland.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10799884
  • Veröffentlicht am:
    23.09.2024
  • Geändert am:
    23.09.2024
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine