Enhancing Building Energy Efficiency through Building Information Modeling (BIM) and Building Energy Modeling (BEM) Integration: A Systematic Review

With the ever-increasing population and historic highest energy demand, the energy efficiency of buildings is becoming crucial. Architectural firms are moving from traditional Computer-Aided Design (CAD) to BIM. However, nearly 40% of the energy consumption is due to buildings. Therefore, there is a need to integrate BIM with Building Energy Modeling (BEM), which presents an innovative opportunity to demonstrate the potential of BIM to minimize energy consumption by integrating building information software with data from existing energy-efficient building automation systems (EBAS). BEM is a form of computational analysis that can be used in conjunction with BIM or Computer-Aided Engineering (CAE) systems. In this paper, an attempt has been made to explore the existing literature on BIM and BEM and identify the effect of the integration of BEM in BIM in the design phase of the project. A recent survey from the last ten years (2012 to 2023) was carried out on Google Scholar, Web of Science, Science Direct, and Scopus databases. Inclusion/exclusion criteria were applied, and papers were scrutinized. From the results, it can be observed that the convergence of BIM and BEM is found to be useful in practical applications; however, projects with short life cycles might not be suitable for this solution. Challenges exist in the interoperability tools which have restrictions on data exchange. Binary translation is found to be the most suitable candidate for data exchange. The analysis further showed that the most used program for integrating BIM/BEM is Green Building Studio developed by Autodesk to improve construction and operational efficiencies.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.