Effects of Lead Core Heating on the Response of Isolated-Base and Fixed-Base Regular and Irregular Reinforced Concrete Structures

In this study, the seismic behavior of isolated- and fixed-base regular and irregular reinforced concrete structures was investigated. For this purpose, a three-dimensional, eight-story reference building model without any irregularity was designed in accordance with the Turkish Building Earthquake Code (TBEC-2018). Later, the building models with irregularities were created using the reference building model. In the building models with seismic isolators and fixed supports, fiber hinges were used for columns and beams to model nonlinear behavior. Moreover, nonlinear behavior at the isolation level was taken into account in building models with seismic isolators. Eleven different earthquake records were scaled using the geometric scaling method. Bi-directional nonlinear response history analysis (NRHA) was performed simultaneously for both horizontal components of the earthquake records in all building models. In addition to boundary analyses (Lower Bound and Upper Bound), which do not take into account the strength loss defined by the codes, analyses considering the strength loss as a result of heating in the lead core due to cyclical motion (Temperature Including) were carried out for building models with seismic isolators. In the analyses, displacement, acceleration, story drift ratio, base shear ratio, and damage mechanisms in the columns and beams obtained from the fixed-base and isolated-base structures were compared. In addition, the results of the analysis, in which the loss of strength due to temperature increase due to cyclical motion in the lead core is taken into account, were compared with the results obtained from the boundary analysis. As a result of the study, it was deduced that significant improvements were observed in the structural behavior of all regular and irregular models with seismic isolators under earthquake effects.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.