Effectiveness of Selected Strain and Displacement Measurement Techniques in Civil Engineering

The aim of this study was to assess how useful certain selected measurement techniques are in civil engineering. In this work, the focus was placed on the measurement of displacement and strain. Classical methods with an established position in the industry, such as electrical resistance strain gauge measurements and linear variable differential transducers (LVDT), were compared with modern techniques that do not require direct contact with the measured object, such as laser scanning and digital image correlation. A simply supported beam was bent in two types of tests. In the first test, a small load was applied on the beam, causing a slight deflection of the structure of approximately 0.5 mm. This enabled us to assess how effective the tested methods were, given the very precise measurement of the structure. In the second test, a much higher load was introduced, which caused displacement that can realistically be found in actual civil engineering structures. Ultimately, the model went through the plastic phase and was damaged. This enabled the measurement of displacement and strain that were much higher than those of the safe operating range of the structure. Based on conducted examinations, practical conclusions were drawn relative to the analyzed measurement methods.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.