Effect of Textile Layers and Hydroxypropyl Methylcellulose on Flexural Behavior of TRLC Thin Plates

To examine the flexural toughness characteristics of textile-reinforced lightweight aggregate concrete (TRLC), a four-point bending test was conducted to assess the impact of varying numbers of textile layers and the inclusion of hydroxypropyl methylcellulose on the ultimate load-bearing capacity and deformation capacity of TRLC thin plates. Six groups of specimens were prepared for the experiment, and the bending capacity of the thin plates in each group was evaluated. The flexural toughness index was utilized to quantify the bending performance of TRLC thin plates. The findings revealed that increasing the number of textile layers improved the initial cracking load, initial cracking deflection, ultimate load, ductility, and flexural toughness of the thin plates. For the specimens without HPMC, the initial cracking load was increased by up to 36.1%, the ultimate load by up to 40.9%, and the flexural toughness index by up to 292% as the number of textile layers was increased. For specimens doped with HPMC, the initial cracking load was increased by up to 61.7%, the ultimate load by up to 246.7%, and the flexural toughness index by up to 65%. The TRLC thin plate containing hydroxypropyl methylcellulose exhibited a reduced initial cracking load yet displayed a stronger matrix consistency and good flexural toughness. Moreover, the enhancement in the ultimate load of TRLC thin plates with hydroxypropyl methylcellulose was more pronounced with an increased number of textile layers, resulting in a significantly higher number of cracks compared to TRLC without hydroxypropyl methylcellulose and an 11.40-fold increase in the flexural toughness index.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.