Effect of Rock Mass Disturbance on Stability of 3D Hoek–Brown Slope and Charts

The present study performs a stability analysis of a three-dimensional (3D) rock slope in disturbed rock masses following the Generalized Hoek–Brown (GHB) failure criterion. The factor of safety (FoS) of the slope is derived and the optimal solution is captured combining the limit analysis method and the strength reduction technique. It is indicated by the parametric analysis that the 3D geometric characteristics have a significant impact on slope stability such that FoS decreases sharply with the increase in the width-to-height ratio B/H within 0<B/H≤2.0 and thereafter reaches a constant value asymptotically. The FoS decreases more than 60% linearly when the disturbance factor D increases from 0 to 1.0. Stability charts and slope angle weight factor fβ_3D for 3D slopes are proposed to provide a convenient and straightforward approach to obtain the FoS solutions of 3D slopes. A case study was carried out to apply the stability charts on practical engineering cases, which showed that slope stability under two-dimensional (2D) plane strain will lead to conservative results, and a 3D stability analysis of slope is more appropriate, especially for a slope with a limited width.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.