Effect of Fractionation Process and Addition of Composite Crumb Rubber-Modified Asphalt on Road Performance Variability of Recycled Asphalt Mixtures with High Reclaimed Asphalt Pavement (RAP) Content

The application of reclaimed asphalt pavement (RAP) can help reduce resource waste and environmental pollution in road construction. However, so far, only a small percentage of RAP materials can be used in road construction. The key obstacles to the application of a recycled asphalt mixture (RAM) with high RAP content are the variability of RAP materials and the difficulty of fully rejuvenating aged asphalt. However, there is still a lack of research on the effect of the variability of RAP materials and recycled asphalt on the quality control of a RAM. Therefore, this study investigates the effects of sieve pretreatment of RAP material using 4.75 mm sieve mesh and the use of composite crumb rubber-modified asphalt (CCRMA) to reclaim aged asphalt on the road performance and frame variability of reclaimed asphalt mixtures. Therefore, this study investigates the effects of the fractionation process of RAP material using 4.75 mm sieve mesh and the use of CCRMA to reclaim aged asphalt on the road performance of a RAM. The results show that the fractionation process can effectively reduce the mitigation of RAP agglomeration and reduce the variability of gradation, which in turn reduces the variability of road performance. The incorporation of CCRMA can effectively improve the high-temperature stability performance and low-temperature cracking resistance. The dynamic stability and the fracture energy of the CRAM (RAM prepared using CCRMA) were four and one and a half times as large as that of the NAM (RAM prepared using base asphalt), respectively. The fractionation process of RAP material and the utilization of CCRMA could help reduce the variability of the RAM while improving the road performance of the RAM.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.