0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Effect of composition and heat treatment on the mechanical properties of Fe Mn Al steels

Autor(en): ORCID

ORCID
ORCID
Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Frattura ed Integrità Strutturale, , n. 62, v. 16
Seite(n): 624-633
DOI: 10.3221/igf-esis.62.43
Abstrakt:

Starting from the research aimed at the development of substitute alloys for stainless steels, with the aim of replacing strategic metals such as chromium and nickel with the more available manganese, FeMnAlC alloys have been studied and developed for several years. These alloys exhibit an attractive strength/ductility combination, low density, and some of them show good oxidation behaviour at high temperatures. After a preliminary study, in this paper the effect of a solubilization treatment followed by aging in the temperature range 550 - 750 °C has been evaluated. The results of the investigation revealed that the steel characterized by the higher amount of Mn and Al shows, after heat treatment, the formation of phases that make the alloy very brittle. Considering the obtained results, it is evident that optimizing the alloy chemical composition is of paramount importance to guarantee a high fracture toughness if the steel works for limited time intervals at high temperature.

Structurae kann Ihnen derzeit diese Veröffentlichung nicht im Volltext zur Verfügung stellen. Der Volltext ist beim Verlag erhältlich über die DOI: 10.3221/igf-esis.62.43.
  • Über diese
    Datenseite
  • Reference-ID
    10703018
  • Veröffentlicht am:
    11.12.2022
  • Geändert am:
    11.12.2022
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine