0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Effect of Ca/Al Ratio on Stabilization/Solidification of Lead-Contaminated Soil by Ettringite

Autor(en):


Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Advances in Civil Engineering, , v. 2018
Seite(n): 1-8
DOI: 10.1155/2018/3612962
Abstrakt:

Ettringite is commonly used for the stabilization/solidification for heavy metal-contaminated soils, and its treatment effect will be influenced by Ca/Al mole ratio. Lead-contaminated soil samples were solidified using ettringite with different Ca/Al mole ratios. The pH value, unconfined compressive strength of solidified samples, and leaching concentration were investigated to understand the influence of Ca/Al mole ratio on properties of ettringite-solidified contaminated soils. The microstructural characteristics of solidified contaminated soils were also explored. The results show that lead leaching concentration decreases dramatically with increasing the content of lime and curing time. Lead concentration drops from 49.89 mg/L to 0.19 mg/L when Ca/Al mole ratio increases from 4 : 3 to 10 : 3 at 28 days and from 36.57 mg/L to near 0 mg/L at 90 days. In addition, the unconfined compressive strength of samples drops at first and then increases with the increase of Ca/Al mole ratio. Besides, the pH values of solidified soil and leachate rise with the increase of content of lime. The pH values of solidified soil increase from 9.68 to 11.34, and there is little difference between 28 days and 90 days. However, the pH values of leachate increase from 5.56 to 8.59 at 28 days, and 90-day pH values increase from 5.65 to 9.44. The results of SEM, XRD, and EDS tests also indicate that Ca/Al mole ratio affects the shape of ettringite, the stabilization/solidification effectiveness of contaminated soil, and the pore of solidified soil. When Ca/Al mole ratio equals to 8 : 3, ettringite content has a substantial increase, and lead leaching concentration is lower than 5 mg/L.

Copyright: © 2018 Lian Xiang et al.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10263634
  • Veröffentlicht am:
    01.01.2019
  • Geändert am:
    02.06.2021
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine