Effect of Adjacent Hole on the Blast-Induced Stress Concentration in Rock Blasting

To investigate the effect of an adjacent hole on the blast-induced stress concentration in rock blasting, a rock blasting model with an adjacent hole is explored through theoretical analysis and numerical simulation. The commercial software LS-DYNA is utilized to simulate adjacent hole effect in rock blasting, in which the Johnson–Holmquist concrete material model is used to simulate rock and the high-explosive-burn-explosive and the equation of state of JWL are used to simulate explosive. Influences of the key parameters of adjacent hole effect in rock blasting, pitch of holes, adjacent hole diameter, and uncoupled medium in a blasting hole are extensively explored. According to the simulation results, when the explosion stress wave spreads to the adjacent hole wall, the tangential stress on the adjacent hole wall induced by the explosion stress wave is always greater than the radial stress. Adjacent hole diameter has a major effect on stress concentration, but with the adjacent hole diameter increasing, the stress concentration phenomenon weakens and the free surface effect of the adjacent hole plays a more important role.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.