0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Eco-Efficient Fiber-Reinforced Preplaced Recycled Aggregate Concrete under Impact Loading

Autor(en):

ORCID
Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Infrastructures, , n. 2, v. 4
Seite(n): 37
DOI: 10.3390/infrastructures4020037
Abstrakt:

This study explores highly eco-efficient preplaced aggregate concrete mixtures having superior tensile characteristics and impact resistance developed for pavement and infrastructure applications. A fully recycled granular skeleton consisting of recycled concrete aggregate and recycled tire rubber granules, and steel wire fibers from scrap tires are first placed in the formwork, then injected with a flowable grout. Considering its very high recycled content and limited mixing and placement energy (only the grout is mixed, and no mechanical vibration is needed), this material has exceptional sustainability features and offers superior time and cost savings. Moreover, typical problems of rapid loss of workability due to the high-water absorption of recycled aggregates and the floating of lightweight tire rubber granules are prevented since the aggregates are preplaced in the formwork. The much higher granular content and its denser skeleton reduce the cementitious dosage substantially and provide high volume stability against shrinkage and thermal strains. The behavior under impact loading of this sustainable preplaced recycled aggregate concrete, incorporating randomly dispersed steel wire fibers retrieved from scrap tires, was investigated using a drop weight impact test. The results show that recycled tire steel wire fibers significantly enhanced the tensile and impact properties. A two-parameter Weibull distribution provided an accurate prediction of the impact failure strength of the preplaced recycled aggregate concrete mixtures, allowing to avert additional costly laboratory experiments.

Copyright: © 2019 the Authors. Licensee MDPI, Basel, Switzerland.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10723281
  • Veröffentlicht am:
    22.04.2023
  • Geändert am:
    10.05.2023
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine